BetaFPV Meteor75 Special Edition including two battery_TBS receiver

Description

Package
1 * Meteor75 Brushless Whoop Quadcopter (1S)_TBS Crossfire
2 * 450mAh 1S 30C Battery with BT2.0 connector
1 * BT2.0 Battery Charger and Voltage Tester
1 *
Customized Carry Case
1 * Spare 40mm 3-blade props (1.5mm Shaft)
1 * S
crewdriver
Bullet Point
Meteor75 is the first generation whoop powered by brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compare with initial PH2.0 connector
The power system uses the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots stronger experience of a powerful indoor and outdoor flight
1102-18000KV motors paired with durable ball bearings for increasing flight time/performance and low maintenance, while it adopts PCB connector to allow you repair it easier once it's disconnected
Flight controller pre-soldered the BT2.0 cable, which can provide more stable and powerful 9A continuous current
Comes with an injection molding canopy, more durable and weighs only 1.5g
The package comes with BT2.0 450mAh 1S lipo and BT2.0-PH2.0 adapter cable. The adapter cable is convenient for charging BT2.0 battery with your stock PH2.0 charger. Meanwhile, we have also released
BT2.0 Lipo Charger Board
to charge 6pcs battery at the same time
Specification
FC&ESC:
F4 1-2S AIO Brushless FC
Frame:
Beta75 Pro 2 Whoop Frame
Motors:
1102 18000KV motor
Props:
40mm 3-Blade Propellers (1.5mm Shaft)
VTX&Camera:
M01 AIO Camera VTX
Receiver : DSMX
Battery:
BT2.0 450mAh 1S 30C Battery
Flight time:
3-4min
Weight: 28.7g (without battery)
Flight Controller
We use the classical
F4 1-2S AIO Brushless FC
on Meteor75 drone. Why not the lighter
F4 1S AIO Brushless FC
board?
The burst current of the Meteor75 could up to 15A even on 1S power. This F4 1-2S FC board could hold so high current in continue flying. Of course, the 1g difference in weight is no sense to such a beast drone.
This AIO F4 FC is suitable for a light 1-2S whoop drone perfectly, Integrated with a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC.
SPECIFICATIONS OF FC & ESC
CPU: STM32F411
Six-Axis: MPU6000
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Injection Molded Canopy
Since Meteor75 whoop drone, we will use an injection molded canopy, which is only 1.5g with camera holder. Of course, much durable than the original canopy.
M01 AIO Camera VTX
- The unit is ultra-lightweight only 3g, perfect for Meteor75. It comes with a super Mini 5.8GHz FPV Transmitter +
800TVL C01 Camera
+ RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband.
Motors
1102 18000KV m
otors
have a great balance between weight and power on this tiny 75mm 1S whoop drones. Only 2.9g with connectors. With the high 18000KV value, it could have a great punch power even only 1S battery.  Also, it adopts PCB connector to allow you to repair it easier once cables disconnected.
BT2.0 Connector
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector.
There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.
Much more choices of BT2.0 series accessories.
We know some of pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 connectors for those people who want to convert the PH2.0 connector to BT2.0 connector.
BT2.0 Connectors (10pcs)
2S Whoop Cable Pigtail (BT 2.0)
BT2.0 1S Whoop Cable Pigtail
BT2.0-PH2.0 Adapter Cable
BT2.0 Battery Charger and Voltage Tester
BT2.0 Connector 1S Lipo Charger Board
BT2.0 450mAh 1S Battery
BT2.0 300mAh 1S Battery
BT2.0 260mAh 1S Battery