IFlight Alpha A75 Analog RC Drone RTF Kit iF8 Remote Controller DVR FPV Goggles

Description

Acasis High Speed 13 Ports USB3.0 HUB USB Splitter with 12V 6A Power Supply Cord
59.79 USD
64.99 USD
Free shipping
8%
off
ShenStar 5328S Propellers 3-Blade PC Props for for DJI FPV Drone Accessories
4.59 USD
4.99 USD
2.0 USD
8%
off
JMT DIY Set Kit J145 145mm Wheelbase RC FPV Drone F405 OSD 2-3S 1200TVL Camera
159.19 USD
173.03 USD
Free shipping
8%
off
XT-XINTE M.2 To PCIE Riser X16 Adapter 4-Disk Expansion Card for NVME M Key SSD
93.98 USD
102.15 USD
Free shipping
8%
off
Flycolor Raptor SLIM 40A BLHeli-S ESC 3in1 Driver IC Support Dshot150 300 600
19.04 USD
20.7 USD
Free shipping
8%
off
XT-XINTE M.2 to Minipcie Transfer Cable A/E Interface for Ngff M2 Adapter Cable
25.36 USD
27.57 USD
Free shipping
8%
off
IFlight RTF Alpha A75 Analog Whoop 20A F4 Whoop AIO 300mW 78mm Brushless 3S Tinywhoop iF8 Remote Controller DVR FPV Goggles for RC Drone
Features:
66.9 grams (without battery)
Butter smooth XING 1103 8000KV,more torque and efficiency
Ducts to protect the sensitive environment or yourself
Pre-tuned with smooth cinematic settings
iFlight Albatross 5.8G light antenna upgrade (included)
Alpha A75 BNF Specs:
SucceX-D 20A Whoop F4 AIO Board
XING 1103 8000KV FPV Micro Motor
Wheelbase: 78mm
Body size: 102.9*102.9mm
Ducted propeller size: HQ 40mm 1.6 inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Weight: 52.1g (without battery)
Battery: 3S 450mAh
(not included)
Alpha A75 Analog BNF
Included Components and Parts
Prebuilt and tested Quadcopter
1x Alpha 78mm Frame
1x RunCam Nano2 Camera
1x 5.8G SucceX Micro Force VTX 300mW
1x iFlight Albatross RHCP 5.8g light antenna
1set x HQ 40mm 1.6 inch 4-blades (Set of 2 - Color May Vary)
1set x Gemfan 40mm 1.6inch 1635 3-blades (Set of 2 - Color May Vary)
2x 10*130mm iFlight Lipo Strap
1x iF8 Remote controller
1x R81 receiver
1x iFlight FPV Goggles
3x FULLSEND 3S 450mAh batteries
1x battery charger
FC: SucceX-D 20A F4 Whoop AIO
Size:30.5*30.5mm
Mounting pattern:25.5*25.5mm/φ3mm
Connector:Micro-USB
MCU:STM32F411
Gyro:MPU6000
Blackbox:8MB
BEC output:5V 2A/10V 2A
INA pad:UART2 (nR2)
Barometer:no
Constant current:20A,25A(Burst)
Input:2-4S
Current sensor:yes
BLHeli:BLHeli-S
ESC Telemetry:no
Target:IFLIGHT_F411_PRO
ESC Firmware:G-H-30 BLS
5.8GHz SucceX Micro 300mW VTX
-Power: PIT/25/100/200mW/300mW
-Antenna interface: IPEX (UFL)
-VTX protocol : IRC Tramp
-Size: 13.5x14.5mm
-Weight: 1.4g
- Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g
iF8 FPV Remote Controller
Size: 160*130*45mm
Weight: 233g
Frequency: 2.400GHZ-2.480GHZ
RF Module: Multi-Protocol Module Compatible (CC2500)
Protocol Options: D8 / D16 v1 FCC / D16 v1 LBT / D16 v2 FCC / D16 v2 LBT (No Frsky ACCESS support)
Max. Tansmission Power: 20dB
Antenna gain: 2dBi
Range: 1~2km @ 20dB (depending on noise floor and RX)
Battery: Built in 3.7V 1000mAh Lithium battery
Charging: Built in USB-C charging
Firmware: OpenTX iF8 Edition (Special iF8 Edition)
Multiprotocol-TX-Module(Stick input protocol selection)
Channels: Up to 8 channels (depending on the model / receiver)
Compatibility
- All D8 and D16 compatible receivers!
- Frsky ACCST protocol (no ACCESS protocol supported)
- iF8 D8RX Receiver (LINK)
- iF16 Receiver
iFlight FPV Goggles with DVR Function
Frequency: 40CH 5.8GHz
Built-in battery: 3.7V/2000mAh Battery
Size: 155*144*113mm
Weight: 295g with 3.7V 2000mAh battery
Headband: 3-Sided Adjustable Headband
Screen size: 4.3 Inch
Resolution: 800*480 (no blur after enlarge by the lens)
Brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
TF card: support up to 32G
Main Feature:
With DVR function video recording, picture saving
High brightness 4.3 inch LCD specially turned for FPV racing or Model airplane.
Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand includes race frequency.
Come with advanced auto-searching function ad show you the working frequency on screen.
Built-in 3.7V/2000mAh battery, each full charge revive around 3.5 hours working time. 3.5 hours working time.
Ergonomic design fit your faces.
92% transparent lens adopted, no distort, no blur on the adage of screen;
Light weight 295g with 3hr 2000mAh battery, RTF for any scale, racing, Model airplane game.
4.3 inch 480*272px HD high brightness LCD.
R81 Receiver
Frequency: 2400-2483.5Mhz
Dimension: 17*11mm
Weight: 2g
Numbers of Channel: 8
Signal form: D8
Output Formal: SBUS inverted/output RSSI
Operating Voltage: 4.5-6V
Antanna Length: 9cm
FULLSEND 3S 450mAh 75C Lipo Battery - XT30
-Minimum Capacity: 450mAh
-Configuration: 3S1P / 11.1V / 3 Cells
-Discharge Rate: 75C
-Net Weight: 39.2g
-Dimensions: 19.5*16.5*63mm
-Charge Plug: JST-XHR-4P
-Discharge Plug: XT30
M4 AC 30W 1-4S Battery Charger-XT30
Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @1-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: <0.005V
Display: LCD IPS 1.54 inch 240*240 resolution
Size: 75mm*54mm*30mm
Weight: 120g
Connector: XT30
Suitable for 4S 350mAh~850mAh LiPo Battery. For the bigger battery, please choose the ISDT Q6 NANO
Using Instructions
1.Connect the power cord,and after booting, enter the main interface
2.Press and hold the button for 2 seconds to select the battery cut-off voltage.
3.Press the button once to select the charging current.
4. Connected to the battery main port and balance port,the charger will automatically start charging after detecting that the battery voltage is normal.
5.After each power on, you need to press the key once to unlock it before it starts charging automatically.
Safety
1.M4AC allows input AC 100-240V, please use normal voltage.
2.Do does not use this product in heat,moisture, flammable or explosive atmospheres.
3.Make sure that the product is running under the attendance of the user.
4.Please unplug the input power when not using this product.